KitchenAid Range

KitchenAid KERC507HBT

Model # KERC507HBT

The KERC507HBT is a KitchenAid range sold in the United States. The source describes the KERC507HBT as a 30″ Freestanding Electric Range with Ceramic-glass Cooktop. Nothing further about its specification was recovered, so nothing further is stated here. The only dated record of it is a capture of KitchenAid’s US product site from February 2000.

The KERC507HBT is a colour or finish variant, printed verbatim on KitchenAid’s archived product page for the KERC507H. An owner whose plate reads KERC507H, or one of its other finishes, is looking at the same machine in a different colour. The other finishes printed on that same page are KERC507HAL. That puts the KERC507HBT two decades or more into use, which is where the door seal, the oven sensing and the surface controls start to decide how the machine behaves. The KERC507HBT is discontinued, so the parts question gets answered first and the price second.

Key Features

  • 30" Freestanding Electric Range with Ceramic-glass Cooktop
  • Recorded on KitchenAid's US product site in February 2000
  • Printed as a colour or finish variant on KitchenAid's archived product page for the KERC507H

Most Common Issues on This Model

01

Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set

02

A surface element or its infinite switch failing, so one zone stays cold or runs at full heat

03

Door hinge and seal wear, letting heat out of the front of the oven

04

A door lock stuck after a self-clean cycle

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KERC507HBT FAQ

KitchenAid places the plate inside the oven's door, so that is where the KERC507HBT label will be. Model and serial are printed on the same sticker. Getting the KERC507HBT number exactly right matters most on an older machine, where parts diverged between otherwise identical-looking siblings.

Then the job stops there and you are told. The KERC507HBT has been out of production for long enough that this is a real possibility on some components, which is why availability for a KERC507HBT is checked before a diagnosis is charged for rather than after.

On most builds it can, but it is heavy and the hinges are under spring tension. With the range switched off at its supply and the oven cold, the hinge locks on a KERC507HBT are engaged before the door is lifted. If the door of a KERC507HBT does not release easily, it is better left to a technician.

Need a repair? We're ready to help. Call Now
Call Us Schedule