KitchenAid Range

KitchenAid KERC500EWH0

Model # KERC500EWH0

KitchenAid sold the KERC500EWH0 as part of its US range range. What KitchenAid published about the KERC500EWH0 is that it is a Freestanding Electric Range with Four Radiant Cooktop Elements, and that single line is all the specification there is. It is recorded on KitchenAid’s US product site in March 2000, and the end of its catalogue run is simply not documented in what was recovered.

The string published here is KERC500EWH0, exactly as KitchenAid printed it. The bare KERC500EWH was not itself seen in any source used for this page, so it is not offered here as a model number in its own right. Strings observed alongside this one in the same source material are KERC500EWH1, KERC500EWH2, KERC500EWH3. If the plate on your machine reads one of those, it belongs to the same family as the KERC500EWH0. A range of that vintage is two decades or more into service, and the door seal, the oven sensing and the surface controls are long past as-new. Whether the KERC500EWH0 is still in production is not established here, so its parts position is checked case by case before any work is quoted.

Key Features

  • Freestanding Electric Range with Four Radiant Cooktop Elements
  • Recorded on KitchenAid's US product site in March 2000
  • Related strings observed in the same source material: KERC500EWH1, KERC500EWH2, KERC500EWH3
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Door hinge and seal wear, letting heat out of the front of the oven

02

A door lock stuck after a self-clean cycle

03

Control board relay faults, where one function is dead and the rest of the range carries on

04

Touch panel or clock display faults after long service

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KERC500EWH0 FAQ

KitchenAid gives the location for its ranges as inside the oven's door, and that is where the KERC500EWH0 plate sits. It is an adhesive label, typically silver on major appliances, carrying the model number and the serial number together. Read the whole KERC500EWH0 string off the label rather than from memory, because it sits in a family of very similar numbers.

Not in itself. The diagnosis on a KERC500EWH0 is the same work either way, and the only practical consequence is that availability for a KERC500EWH0 part is confirmed before the job is priced rather than assumed.

With the range switched off at its supply, the oven temperature sensor on a KERC500EWH0 is the first part measured, because a drifted sensor makes the control heat to the wrong figure. Only once the sensor on a KERC500EWH0 has been proved are the heating components considered.

Need a repair? We're ready to help. Call Now
Call Us Schedule