KitchenAid Oven

KitchenAid KEBS208DSS

Model # KEBS208DSS

KitchenAid sold the KEBS208DSS as part of its US wall oven range. The one specification line recovered for the KEBS208DSS describes it as a Superba® 30″ Double Thermal Convection® Oven Upper and Lower – both Self-cleaning, and this page does not go beyond it. A single dated capture, January 2000, places it on KitchenAid’s US product site, and nothing after that does.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KEBS208DSS6. A plate reading one of those is still a KEBS208DSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. By now a KEBS208DSS is an old machine, and the door seal, the hinges and the heating elements carry most of the wear. The KEBS208DSS is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • Superba® 30" Double Thermal Convection® Oven Upper and Lower - both Self-cleaning
  • Recorded on KitchenAid's US product site in January 2000
  • Rating-plate revision codes observed for this model: KEBS208DSS6
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A door lock motor or switch stuck after a self-clean cycle, leaving the door latched shut

02

A thermal fuse or limit device tripped after self-clean, so the oven is dead with nothing on the display

03

Touch control membrane wear, where presses are ignored or register on their own

04

Cooling fan noise or failure in the control housing

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KEBS208DSS FAQ

KitchenAid's stated location for its wall ovens is inside the door, and the KEBS208DSS follows it. The label is the one that matters: it gives the full KEBS208DSS model string and the serial number, which together identify which production revision you have.

It affects supply rather than skill. Most of what fails on a KEBS208DSS is a wear component that is still obtainable, and those repairs stay worthwhile. Where a KEBS208DSS part has genuinely gone out of supply, that is said plainly rather than worked around.

With the oven switched off at its supply and left to cool right down, the lock motor and its switch on a KEBS208DSS are the parts involved. This is a common outcome of self-clean on a KEBS208DSS and is a component repair rather than a sign the oven is finished.

Need a repair? We're ready to help. Call Now
Call Us Schedule