High - Stop Use, Call Now

KitchenAid Range F06 Error Code (Control Board)

Freestanding and slide-in Range: F06 is published with the sentence that there may be a problem with the electronic control, or the associated wiring. F06 is the three-character form printed on certain range displays and is kept as its own…

What F06 Means

Freestanding and slide-in Range: F06 is published with the sentence that there may be a problem with the electronic control, or the associated wiring. F06 is the three-character form printed on certain range displays and is kept as its own page. Read the exact form on your display, because this family prints control faults in several ways and the pages behind them are not interchangeable. KitchenAid notes on the pages in this family that the error code may display in F# E# format or in E# F# format, so the same fault can appear with the two halves swapped.

Common Causes of F06

  • The control failing one of its own internal checks
  • Wiring between the control and the rest of the range loose or degraded
  • A supply disturbance leaving the electronics in a faulted state

🔧 One Safe Check You Can Try

Let the oven cavity and the cooktop cool before you do anything, and put every surface knob at off. A range holds heat in its grates or its glass long after the controls are off. Do the reset at the breaker: power the range down by switching off its circuit breakers for one minute, power it back up, watch it for one minute to be sure the code does not return, and verify the range operates. If F06 returns, note whether it appears immediately on power-up or only once a cycle has been started, because a fault present from cold and one that needs heat to appear point in different directions behind the same characters.

⚠ Why You Shouldn't Go Further Than That

  • The electronics named here permit heating, so a range that keeps reporting the fault should be left off at the breaker rather than used and watched.
  • Board and wiring are named in one sentence with no test published to separate them, which makes measurement the sensible starting point.
  • On a gas model the supply line and its shut-off are behind the range, so moving the appliance means the gas off first and the connection tested afterwards - not an owner step.

Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.

Other Range Error Codes

Related Guides

Still Seeing F06?

Book a trained technician and get it diagnosed correctly the first time — no guesswork, no repeat visits.

FAQ

F06 FAQ

No. KitchenAid publishes the printed forms as separate pages with different content, so F06 should be quoted exactly as it appeared.

KitchenAid publishes no symptom with F06, so what the range actually does - heats, refuses to start, or stops part-way - is an observation you supply.

Need a repair? We're ready to help. Call Now
Call Us Schedule