A condenser fan that has seized or slowed is a common cause of poor cooling on the KTRC22EKWH, especially noticeable in warm weather. Sealed-system problems are the more serious possibility if the fan checks out fine, and if found we say so plainly.
KitchenAid KTRP22EKBT
A door gasket that has hardened with age is common on the KTRP22EKBT, letting warm air in once it stops pulling the door tight. Water supply problems are the other issue to check on a plumbed unit, whether at the valve, the line, or the filter housing.
KitchenAid KTRC22ELBL
Compressor start relay and overload problems are common on the KTRC22ELBL, often heard as a repeated click with no cooling ever starting. Evaporator fan bearing wear is the other issue to watch for, since it can progress until the fan will not start from cold.
KitchenAid KTRC22ELSS
A door seal gone stiff is common on the KTRC22ELSS, letting warm air track in along one edge even when the rest of the door looks properly sealed. Water inlet valve or supply line leaks are the other issue to check on a plumbed unit.
KitchenAid KTRA22ELBL
A failed start device is a common cause of compressor trouble on the KTRA22ELBL, making it hum briefly and drop out on overload instead of starting. Evaporator fan motor noise is the other issue to check, since a fan that stops can leave the fresh food side warmer than the freezer.
KitchenAid KTRC22ELWH
Ice production tailing off is common on the KTRC22ELWH, usually traced to the fill valve, a frozen fill tube, or the module itself. Broken crisper runners and door bin lugs are the other thing to expect, and mostly cosmetic rather than a sign of a cooling problem.
KitchenAid KTRA22ELSS
A perished door gasket is a common issue on the KTRA22ELSS, showing up as condensation around the door frame and a compressor that rarely shuts off. Start relay failure is the other thing to check if the compressor won’t start at all despite being mechanically sound.
KitchenAid KTRC22EMBL
A blocked defrost drain is a common, inexpensive fix on the KTRC22EMBL if water is showing up under the crispers or on the floor. Ice maker fill or harvest problems are the other thing to check where one is fitted, usually a slow or uneven fill.
KitchenAid KTRA22ELWH
Ice maker fill or harvest problems are worth checking on a KTRA22ELWH that is fitted with one and producing less ice than it should. Shelf and bin breakages are the other common issue, and it is worth replacing a cracked one before it fails outright.
KitchenAid KTRC22EMSS
A failing evaporator fan is common on the KTRC22EMSS, usually starting as a whine that turns into a rattle that changes when the door is held shut. Door hinge and closer wear is the other issue to check, leaving the door sitting proud instead of swinging fully shut on its own.