KitchenAid KBRS20ET

On the KBRS20ET, frost that packs solid over the evaporator usually traces back to a defrost heater, thermostat, or timer that has quit cycling, and the cabinet warms slowly as a result. An ice maker that fills but will not eject the cubes is another frequent complaint on this model.

KitchenAid KBSD702MPS

Electronic control failure — where the KBSD702MPS keeps running but stops responding to the panel — is one issue we see on this model. Worn evaporator fan bearings are another common finding, showing up as a fan that struggles to start from cold, and condenser coils clogged with dust or pet hair can make the […]

KitchenAid KBRS20ETSS

Sagging doors with worn hinge cams are a common issue on the KBRS20ETSS, keeping the door seal from meeting the cabinet squarely. A blocked drain at the back of the freezer floor is another frequent, low-cost fix worth checking at the same time, and a defrost cycle that has stopped running can let ice build […]

KitchenAid KBSN602EPA

A control that misreads the cabinet’s actual temperature is a common issue on the KBSN602EPA, making the compressor run far longer or shorter than it needs to. Leaks from the water inlet valve or supply line are another frequent finding on units plumbed for water.

KitchenAid KBRS22ETSS

If the KBRS22ETSS stops responding to its settings, an aged-out control board is usually the culprit rather than anything wired incorrectly. Evaporator fan motor noise is another common finding, sometimes letting the fresh food side warm while the freezer stays cold, and restricted airflow around the condenser from dust buildup is a third reason it […]

KitchenAid KBSN602ESS

A door switch problem — including an interior lamp that stays lit with the door shut — is a common, inexpensive issue on the KBSN602ESS. A perished door gasket is another frequent finding, letting warm air in and keeping the compressor running longer than it should.

KitchenAid KBRS22EVWH

Cold control or thermistor drift is a common issue on the KBRS22EVWH, leaving the cabinet running warm or over-freezing the top shelf. A slow, easy-to-miss puddle behind the cabinet often points to a weeping inlet valve, and a compressor that suddenly goes silent mid-cycle usually means the start relay has failed rather than the compressor […]

KitchenAid KBSN608EPA

Loss of refrigerant charge is the more serious issue worth ruling out on the KBSN608EPA, since it decides whether the unit is still worth repairing. A defrost drain that freezes solid, sending meltwater under the crisper drawers, is a far more common and cheaper finding.

KitchenAid KBRS22KCMS

A failed interior lamp or a door switch that no longer registers the door as closed is a common, inexpensive fix on the KBRS22KCMS. A hardened door gasket that has lost its seal is another frequent finding worth checking at the same visit, and shelf or bin breakages are worth chasing down early before parts […]

KitchenAid KBSN608ESS

A condenser fan that has seized or slowed is a common finding on the KBSN608ESS, usually showing up first as weaker cooling in warm weather. Door hinge and closer wear is another frequent issue, leaving the door sitting proud instead of swinging shut on its own.

Need a repair? We're ready to help. Call Now
Call Us Schedule