KitchenAid KEMS377DAL

Like the rest of the KEMS377 family, the KEMS377DAL combines a thermal convection oven with a Crispwave® microwave in one cabinet, and after years of heat and grease exposure the control board is the part most often blamed for erratic behavior. A blocked cooling fan path is worth ruling out first, though, since it can […]

KitchenAid KHHS179LSS

A KHHS179LSS that lights up and runs its fan but never actually heats almost always has a failed door interlock switch behind it — the safety circuit doing its job rather than a random breakdown. It’s a contained switch swap once confirmed, not a sign the whole control system is going.

KitchenAid KEMS377DBL

The KEMS377DBL shares its cabinet and controls with the rest of the KEMS377 line, and the failure we see most on it is a door interlock switch that has given out — the oven still lights up and runs its fan, but the magnetron never gets the signal to heat. That’s a safety interlock doing […]

KitchenAid KHHS179LWH

On the KHHS179LWH, a failure in the high-voltage circuit that drives the magnetron is one of the more serious repairs, and it’s bench work only, since the capacitor involved can hold a dangerous charge well after the oven is unplugged. A blocked cooling fan is a far more common and cheaper explanation for similar no-heat […]

KitchenAid KEMS377DBS

On the KEMS377DBS, a failure in the high-voltage section — the transformer, capacitor or diode that drives the magnetron — is one of the more serious repairs this model sees, and it’s strictly bench work behind the casing rather than anything an owner should probe. A blocked cooling fan path is a far more common […]

KitchenAid KHMC107EBL

Slower, uneven heating on a KHMC107EBL is usually the magnetron nearing the end of its life rather than anything to do with the timer or keypad settings. A failed door interlock switch is the other common cause of a no-heat complaint, and the two are distinguished quickly once the oven is opened up.

KitchenAid KEMS377DWH4

The KEMS377DWH4 is the same SUPERBA® combination oven/microwave as the rest of the family, and its magnetron is the part most likely to show its age, heating slower and less evenly as it nears the end of its service life. A failed door interlock switch is the other frequent cause of a no-heat complaint on […]

KitchenAid KHMC107EWH

The KHMC107EWH depends on clean grease and charcoal filters more than most owners realize, and neglecting them shows up as weak extraction and a fan straining to keep up long before anything else fails. Left unaddressed for years, that same grease exposure is what eventually damages the control board.

KitchenAid KEMS378G

The KEMS378G pairs a microwave with a second convection oven below it, so it depends on its cooling fan more than a standalone unit does, and a path clogged with grease is the most common reason one of these overheats and cuts a cycle short. Keeping the filters clean is genuinely the best preventative step […]

KitchenAid KHMC1857BSP

The KHMC1857BSP can throw a false door-not-closed reading when the door seal face has worn or been damaged, which looks identical to an actual interlock switch failure until a technician inspects the seal itself. Confirming which one it is first avoids paying for a switch that didn’t need replacing.

Need a repair? We're ready to help. Call Now
Call Us Schedule