KitchenAid Oven

KitchenAid KOSE500ESS

Model # KOSE500ESS

The KOSE500ESS belongs to KitchenAid’s US wall oven catalogue. No published specification for this model was recovered — no dimension, no capacity, no feature list — so none is stated here, and no figure has been taken from a neighbouring model number. It was on KitchenAid’s US product site from March 2015 to July 2024 and gone after that.

That puts a KOSE500ESS roughly ten to fifteen years into service, the point at which the door seal, the hinges and the heating elements tend to need attention. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from March 2015 to July 2024
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Touch control membrane wear, where presses are ignored or register on their own

02

Cooling fan noise or failure in the control housing

03

Convection fan bearing noise, or a fan that no longer turns, where a convection cavity is fitted

04

Oven lamp and lamp holder failures

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KOSE500ESS FAQ

KitchenAid gives the location for its wall ovens as inside the door, and that is where the KOSE500ESS plate sits. It is an adhesive label, typically silver on major appliances, carrying the model number and the serial number together. Read the whole KOSE500ESS string off the label rather than from memory, because it sits in a family of very similar numbers.

Production of the KOSE500ESS ended some time ago. That does not rule out a repair - the wear items are largely shared across a generation - but it does mean the parts question on a KOSE500ESS is settled before any figure is put on the work.

With the oven switched off at its supply, the oven temperature sensor on a KOSE500ESS is the part tested first, because a sensor that has drifted reports the wrong cavity temperature and the control heats to it faithfully. Element and control faults on a KOSE500ESS are considered after the sensor has been proved.

Need a repair? We're ready to help. Call Now
Call Us Schedule