KitchenAid Oven

KitchenAid KODE300ESS

Model # KODE300ESS

The KODE300ESS is a KitchenAid wall oven sold in the United States. No published specification for this model was recovered, and none is invented here to fill the space. KitchenAid’s US product site carried it from March 2015 to September 2017, and nothing was captured for it afterwards.

A KODE300ESS in use today is about a decade old, and the door seal, the hinges and the heating elements account for most of what it gets called out for. The KODE300ESS is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from March 2015 to September 2017
  • A KitchenAid owner's manual for this model is on record
  • KitchenAid published an installation dimension guide for it

Most Common Issues on This Model

01

A door lock motor or switch stuck after a self-clean cycle, leaving the door latched shut

02

A thermal fuse or limit device tripped after self-clean, so the oven is dead with nothing on the display

03

Touch control membrane wear, where presses are ignored or register on their own

04

Cooling fan noise or failure in the control housing

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KODE300ESS FAQ

No - front badging is a series name, not a model number. The KODE300ESS number comes off the plate inside the door, and that is the string to work from. Two machines wearing the same front badge can differ in parts, so the KODE300ESS plate is what settles it.

Often yes, and where they cannot we say so at the point we find out, so you are not billed for work that cannot be completed. That check comes first on a discontinued model like the KODE300ESS, not last.

With the oven switched off at its supply, the dead element on a KODE300ESS is tested for continuity and its relay on the control board is checked. On a KODE300ESS a single dead element far more often means the element or its relay than the whole control.

Need a repair? We're ready to help. Call Now
Call Us Schedule