KitchenAid sold the KOCE500EBL as part of its US wall oven range. No published specification for this model was recovered — no dimension, no capacity, no feature list — so none is stated here, and no figure has been taken from a neighbouring model number. It appears on KitchenAid’s US product site in September 2015 and nowhere after that.
KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KOCE500EBL01. A plate reading one of those is still a KOCE500EBL; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. That puts a KOCE500EBL roughly ten to fifteen years into service, the point at which the door seal, the hinges and the heating elements tend to need attention. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site in September 2015
- Rating-plate revision codes observed for this model: KOCE500EBL01
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
A failed bake or broil element, often visible as a break or a blistered section on the element itself
Oven temperature sensor drift, so the cavity runs hot or cold against the temperature set
Door hinge wear, which lets heat escape at the top of the door and upsets the cavity temperature
A door lock motor or switch stuck after a self-clean cycle, leaving the door latched shut