The KEBS177S is a KitchenAid wall oven. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here. It appears on KitchenAid’s US product site in February 2013 and nowhere after that.
That puts a KEBS177S roughly ten to fifteen years into service, the point at which the door seal, the hinges and the heating elements tend to need attention. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KEBS177S is established before any figure is put on the job.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site in February 2013
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
Oven temperature sensor drift, so the cavity runs hot or cold against the temperature set
Door hinge wear, which lets heat escape at the top of the door and upsets the cavity temperature
A door lock motor or switch stuck after a self-clean cycle, leaving the door latched shut
A thermal fuse or limit device tripped after self-clean, so the oven is dead with nothing on the display