The KEBK101SSS belongs to KitchenAid’s US wall oven catalogue. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. The only dated record of it is a capture of KitchenAid’s US product site from February 2013.
KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KEBK101SSS00. A plate reading one of those is still a KEBK101SSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KEBK101SSS in use today is about a decade old, and the door seal, the hinges and the heating elements account for most of what it gets called out for. Being out of production, a KEBK101SSS has its parts position checked at the outset rather than after a diagnosis.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site in February 2013
- Rating-plate revision codes observed for this model: KEBK101SSS00
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
On a double cavity, one oven working normally while the other will not come up to temperature
A failed bake or broil element, often visible as a break or a blistered section on the element itself
Oven temperature sensor drift, so the cavity runs hot or cold against the temperature set
Door hinge wear, which lets heat escape at the top of the door and upsets the cavity temperature