KitchenAid Dishwasher

KitchenAid KDTE334DBL

Model # KDTE334DBL

The KDTE334DBL is a US-market KitchenAid dishwasher. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. It sat in KitchenAid’s US catalogue from July 2014 until September 2015, which is the window the archive records.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KDTE334DBL0. A plate reading one of those is still a KDTE334DBL; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. Ten years and more into service, a KDTE334DBL is at the age where the door seal, the pump and the spray system are the usual suspects. The KDTE334DBL is discontinued, so the parts question gets answered first and the price second.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from July 2014 to September 2015
  • Rating-plate revision codes observed for this model: KDTE334DBL0
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A door latch or latch switch that no longer tells the control the door is shut, so the cycle will not start

02

A perished door seal, showing as damp on the floor in front of the machine rather than an obvious flood

03

A heating element that has lost continuity, so the load comes out clean but cold and wet

04

Spray arm jets and bearings blocked with debris, giving a patchy wash on the upper rack

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KDTE334DBL FAQ

The plate on the left edge of the dishwasher's door carries everything needed: the full KDTE334DBL model string and the serial number beside it. With those two, a part for a KDTE334DBL can be identified before anyone travels out, which saves a wasted visit.

The KDTE334DBL is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KDTE334DBL; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

Not necessarily, and it is the last thing assumed. On a KDTE334DBL a cycle that stalls is more often a fill or drain fault, or a float switch held up, than a failed control. With the dishwasher switched off at its supply, those are proved first on a KDTE334DBL before any board is condemned.

Need a repair? We're ready to help. Call Now
Call Us Schedule