The KUDE48FXWH is one of the KitchenAid dishwashers. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here. KitchenAid’s US product site shows it in September 2013, and no later capture carries it.
KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KUDE48FXWH0, KUDE48FXWH1, KUDE48FXWH2, KUDE48FXWH6. A plate reading one of those is still a KUDE48FXWH; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. Ten years and more into service, a KUDE48FXWH is at the age where the door seal, the pump and the spray system are the usual suspects. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KUDE48FXWH is established before any figure is put on the job.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site in September 2013
- Rating-plate revision codes observed for this model: KUDE48FXWH0, KUDE48FXWH1, KUDE48FXWH2, KUDE48FXWH6
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
An inlet valve stuck part open or failed shut, so the machine either overfills or never fills
Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub
A float switch held up, which the control reads as an overfill and stops the cycle
Control board and touch panel faults after years of steam and heat cycling