KitchenAid sold the KUDD03DTSS as part of its US dishwasher range. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. A single dated capture, December 2010, places it on KitchenAid’s US product site, and nothing after that does.
KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KUDD03DTSS10, KUDD03DTSS2, KUDD03DTSS3. A plate reading one of those is still a KUDD03DTSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A machine of that age has had enough cycles for the door seal, the pump and the spray system to have moved on from new, and that is where diagnosis usually starts on a KUDD03DTSS. Being out of production, a KUDD03DTSS has its parts position checked at the outset rather than after a diagnosis.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site in December 2010
- Rating-plate revision codes observed for this model: KUDD03DTSS10, KUDD03DTSS2, KUDD03DTSS3
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
A heating element that has lost continuity, so the load comes out clean but cold and wet
Spray arm jets and bearings blocked with debris, giving a patchy wash on the upper rack
An inlet valve stuck part open or failed shut, so the machine either overfills or never fills
Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub