KitchenAid Microwave

KitchenAid KHMS105ESB

Model # KHMS105ESB

The KHMS105ESB is a KitchenAid microwave oven. KitchenAid’s published description of the KHMS105ESB is an Over-the-range Microwave Oven/Hood with 2-speed Exhaust System. No other specification for it survives in the sources used here. KitchenAid’s US product site shows it in March 2000, and no later capture carries it.

The KHMS105ESB is a colour or finish variant, printed verbatim on KitchenAid’s archived product page for the KHMS105E. An owner whose plate reads KHMS105E, or one of its other finishes, is looking at the same machine in a different colour. The other finishes printed on that same page are KHMS105EAL, KHMS105EBL, KHMS105EWH. A KHMS105ESB still in a kitchen today has twenty-odd years behind it, and that age shows first in the door latch, the interlock switches and the turntable drive. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KHMS105ESB is established before any figure is put on the job.

Key Features

  • Over-the-range Microwave Oven/Hood with 2-speed Exhaust System
  • Recorded on KitchenAid's US product site in March 2000
  • Printed as a colour or finish variant on KitchenAid's archived product page for the KHMS105E

Most Common Issues on This Model

01

Cavity paint worn through where dishes rub, which leads to rust at that spot

02

Keypad legends worn away with use, so the panel is hard to read

03

A door seal face damaged, which the oven can read as an interlock fault

04

A magnetron reaching the end of its life, showing as heating that has become slow and uneven

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KHMS105ESB FAQ

The plate inside the door carries everything needed: the full KHMS105ESB model string and the serial number beside it. With those two, a part for a KHMS105ESB can be identified before anyone travels out, which saves a wasted visit.

The KHMS105ESB is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KHMS105ESB; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

A fault that draws current only under load, which is internal. Unplug the KHMS105ESB at the wall and leave it unplugged. The components involved on a KHMS105ESB sit behind the casing and hold a charge, so that diagnosis belongs with a technician rather than with a repeated attempt to run it.

Need a repair? We're ready to help. Call Now
Call Us Schedule