KitchenAid Cooktop

KitchenAid KGCS105GBT

Model # KGCS105GBT

The KGCS105GBT is a US-market KitchenAid cooktop. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. KitchenAid’s US product site carried it from April 2004 to August 2004, and nothing was captured for it afterwards.

KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KGCS105GBT06. A plate reading one of those is still a KGCS105GBT; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. That puts the KGCS105GBT two decades or more into use, which is where the switches, the element or burner connections and the control knobs start to decide how the machine behaves. Being out of production, a KGCS105GBT has its parts position checked at the outset rather than after a diagnosis.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from April 2004 to August 2004
  • Rating-plate revision codes observed for this model: KGCS105GBT06
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Downdraft vent motor or damper faults, where a downdraft system is fitted

02

A gas valve that will not hold its low setting, so the flame drops out when turned down

03

Wiring damage under the cooktop from years of heat cycling

04

Control knobs and their shafts worn, so the setting no longer matches the mark on the panel

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KGCS105GBT FAQ

No - front badging is a series name, not a model number. The KGCS105GBT number comes off the plate on the cooktop's liner, beneath the burners, and that is the string to work from. Two machines wearing the same front badge can differ in parts, so the KGCS105GBT plate is what settles it.

Often yes, and where they cannot we say so at the point we find out, so you are not billed for work that cannot be completed. That check comes first on a discontinued model like the KGCS105GBT, not last.

On a gas configuration that is nearly always moisture or debris bridging an igniter. With the cooktop switched off at its supply and the gas turned off at its tap, the burner caps and igniters on a KGCS105GBT are dried and cleaned, and a KGCS105GBT that still clicks after that has a switch or module fault.

Need a repair? We're ready to help. Call Now
Call Us Schedule