KitchenAid Microwave

KitchenAid KEMC308KBL

Model # KEMC308KBL

The KEMC308KBL is a KitchenAid microwave oven. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. KitchenAid’s US product site shows it in December 2005, and no later capture carries it.

KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KEMC308KBL03, KEMC308KBL04. A plate reading one of those is still a KEMC308KBL; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KEMC308KBL still in a kitchen today has twenty-odd years behind it, and that age shows first in the door latch, the interlock switches and the turntable drive. Being out of production, a KEMC308KBL has its parts position checked at the outset rather than after a diagnosis.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in December 2005
  • Rating-plate revision codes observed for this model: KEMC308KBL03, KEMC308KBL04
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A cooling fan path blocked with grease, so the oven overheats and stops part way through a programme

02

Waveguide cover degradation inside the cavity, visible as scorching at one spot

03

Cavity paint worn through where dishes rub, which leads to rust at that spot

04

Keypad legends worn away with use, so the panel is hard to read

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KEMC308KBL FAQ

The plate inside the door carries everything needed: the full KEMC308KBL model string and the serial number beside it. With those two, a part for a KEMC308KBL can be identified before anyone travels out, which saves a wasted visit.

The KEMC308KBL is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KEMC308KBL; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

Where the unit is installed over a range, grease loading on the fan and filters is the usual cause. With the KEMC308KBL unplugged at the wall, the grease filters can be taken out and washed by an owner. Anything beyond the filters on a KEMC308KBL is technician work, because the casing has to come off.

Need a repair? We're ready to help. Call Now
Call Us Schedule