KitchenAid Cooktop

KitchenAid KECS100GBL

Model # KECS100GBL

The KECS100GBL is one of the KitchenAid cooktops. No published specification for this model was recovered — no dimension, no capacity, no feature list — so none is stated here, and no figure has been taken from a neighbouring model number. KitchenAid’s US product site carried it from April 2004 to August 2004, and nothing was captured for it afterwards.

That puts the KECS100GBL two decades or more into use, which is where the switches, the element or burner connections and the control knobs start to decide how the machine behaves. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from April 2004 to August 2004
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

A gas valve that will not hold its low setting, so the flame drops out when turned down

02

Wiring damage under the cooktop from years of heat cycling

03

Control knobs and their shafts worn, so the setting no longer matches the mark on the panel

04

A thermal limiter cutting a zone early because the glass beneath it is running hot

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KECS100GBL FAQ

No - front badging is a series name, not a model number. The KECS100GBL number comes off the plate on the cooktop's liner, beneath the burners, and that is the string to work from. Two machines wearing the same front badge can differ in parts, so the KECS100GBL plate is what settles it.

Often yes, and where they cannot we say so at the point we find out, so you are not billed for work that cannot be completed. That check comes first on a discontinued model like the KECS100GBL, not last.

On a gas configuration that is nearly always moisture or debris bridging an igniter. With the cooktop switched off at its supply and the gas turned off at its tap, the burner caps and igniters on a KECS100GBL are dried and cleaned, and a KECS100GBL that still clicks after that has a switch or module fault.

Need a repair? We're ready to help. Call Now
Call Us Schedule