KitchenAid Cooktop

KitchenAid KECC507RWW

Model # KECC507RWW

The KECC507RWW belongs to KitchenAid’s US cooktop catalogue. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. A single dated capture, February 2013, places it on KitchenAid’s US product site, and nothing after that does.

KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KECC507RWW03. A plate reading one of those is still a KECC507RWW; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A machine of that age has had enough cycles for the switches, the element or burner connections and the control knobs to have moved on from new, and that is where diagnosis usually starts on a KECC507RWW. The KECC507RWW is discontinued, so the parts question gets answered first and the price second.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in February 2013
  • Rating-plate revision codes observed for this model: KECC507RWW03
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A burnt element receptacle, which shows as scorching underneath the cooking zone

02

A hot-surface indicator that stays lit long after the cooktop has cooled

03

Downdraft vent motor or damper faults, where a downdraft system is fitted

04

A gas valve that will not hold its low setting, so the flame drops out when turned down

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KECC507RWW FAQ

KitchenAid's stated location for its cooktops is on the cooktop's liner, beneath the burners, and the KECC507RWW follows it. The label is the one that matters: it gives the full KECC507RWW model string and the serial number, which together identify which production revision you have.

It affects supply rather than skill. Most of what fails on a KECC507RWW is a wear component that is still obtainable, and those repairs stay worthwhile. Where a KECC507RWW part has genuinely gone out of supply, that is said plainly rather than worked around.

On a KECC507RWW that is usually a switch cycling early or an element that has lost part of its output rather than a single dramatic failure. With the cooktop switched off at its supply, both are measured, and on a KECC507RWW the comparison between zones is what makes the fault obvious.

Need a repair? We're ready to help. Call Now
Call Us Schedule