KitchenAid Oven

KitchenAid KEBK101S

Model # KEBK101S

KEBK101S is one of the wall oven model numbers KitchenAid carried in the United States. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. It appears on KitchenAid’s US product site in February 2013 and nowhere after that.

That puts a KEBK101S roughly ten to fifteen years into service, the point at which the door seal, the hinges and the heating elements tend to need attention. The KEBK101S is discontinued, so the parts question gets answered first and the price second.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in February 2013
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Convection fan bearing noise, or a fan that no longer turns, where a convection cavity is fitted

02

Oven lamp and lamp holder failures

03

Door glass that has slipped in the frame, or an inner pane that has cracked

04

Relay failure on the control board, so one element never energises while the rest of the oven works

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KEBK101S FAQ

KitchenAid gives the location for its wall ovens as inside the door, and that is where the KEBK101S plate sits. It is an adhesive label, typically silver on major appliances, carrying the model number and the serial number together. Read the whole KEBK101S string off the label rather than from memory, because it sits in a family of very similar numbers.

Production of the KEBK101S ended some time ago. That does not rule out a repair - the wear items are largely shared across a generation - but it does mean the parts question on a KEBK101S is settled before any figure is put on the work.

With the oven switched off at its supply, the oven temperature sensor on a KEBK101S is the part tested first, because a sensor that has drifted reports the wrong cavity temperature and the control heats to it faithfully. Element and control faults on a KEBK101S are considered after the sensor has been proved.

Need a repair? We're ready to help. Call Now
Call Us Schedule