The KDTE704DWH is one of the KitchenAid dishwashers. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. It was on KitchenAid’s US product site from March 2015 to September 2015 and gone after that.
KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KDTE704DWH0. A plate reading one of those is still a KDTE704DWH; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. That puts a KDTE704DWH roughly ten to fifteen years into service, the point at which the door seal, the pump and the spray system tend to need attention. The KDTE704DWH is discontinued, so the parts question gets answered first and the price second.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site from March 2015 to September 2015
- Rating-plate revision codes observed for this model: KDTE704DWH0
- A KitchenAid owner's manual for this model is on record
- KitchenAid published an installation dimension guide for it
Most Common Issues on This Model
Drain hose and clip wear at the connection, which leaks only while the pump is running
Scale build-up on the heater and in the spray system where the water is hard
A diverter or wash-arm feed fault that leaves one rack washing and the other not
A drain pump that hums but moves no water, leaving standing water in the sump at the end of a cycle