The KDTE704DBL is a US-market KitchenAid dishwasher. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here. KitchenAid’s US product site carried it from June 2014 to September 2015, and nothing was captured for it afterwards.
KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KDTE704DBL0. A plate reading one of those is still a KDTE704DBL; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KDTE704DBL in use today is about a decade old, and the door seal, the pump and the spray system account for most of what it gets called out for. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KDTE704DBL is established before any figure is put on the job.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site from June 2014 to September 2015
- Rating-plate revision codes observed for this model: KDTE704DBL0
- A KitchenAid owner's manual for this model is on record
- KitchenAid published an installation dimension guide for it
Most Common Issues on This Model
An inlet valve stuck part open or failed shut, so the machine either overfills or never fills
Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub
A float switch held up, which the control reads as an overfill and stops the cycle
Control board and touch panel faults after years of steam and heat cycling