The KDTE504DSS belongs to KitchenAid’s US dishwasher catalogue. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. The archive of KitchenAid’s US product site holds it from February 2014 through to September 2015, and no later capture carries it.
KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KDTE504DSS0. A plate reading one of those is still a KDTE504DSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A machine of that age has had enough cycles for the door seal, the pump and the spray system to have moved on from new, and that is where diagnosis usually starts on a KDTE504DSS. The KDTE504DSS is discontinued, so the parts question gets answered first and the price second.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site from February 2014 to September 2015
- Rating-plate revision codes observed for this model: KDTE504DSS0
- A KitchenAid owner's manual for this model is on record
- KitchenAid published an installation dimension guide for it
Most Common Issues on This Model
Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub
A float switch held up, which the control reads as an overfill and stops the cycle
Control board and touch panel faults after years of steam and heat cycling
Rack rollers and rail wear, so a loaded rack drops or jams halfway out