Medium - Inspection Needed

KitchenAid Built-In Microwave 1c4c Error Code

Built-In Microwave, including the microwave-oven combination: the published text for 1c4c is a single sentence - "There may be a problem with the Oven Control, or the associated wiring." The oven control is the board that decides what the appliance…

What 1c4c Means

Built-In Microwave, including the microwave-oven combination: the published text for 1c4c is a single sentence - "There may be a problem with the Oven Control, or the associated wiring." The oven control is the board that decides what the appliance does next - which element or magnetron circuit is allowed to run, for how long, and when to stop. A problem raised against it means the board caught something it could not account for in its own operation and stopped rather than carry on guessing. KitchenAid adds no threshold, no sign and no second cause; the page moves straight to a power reset.

Common Causes of 1c4c

  • The oven control failing one of its own internal checks
  • The wiring loom between the control and the rest of the appliance loose, chafed or corroded
  • Control electronics disturbed by a supply surge or an outage

🔧 One Safe Check You Can Try

Let the appliance cool and leave the door closed, then do the reset from the breaker panel - not by hunting for a plug behind a built-in cabinet: power the unit down by switching off the circuit breakers for one minute, power it back up, watch the oven for one minute to see whether the code returns, and verify the oven operates. Note what the appliance was doing when 1c4c appeared, because a code that only turns up during one function is worth far more to a technician than a code with no context.

⚠ Why You Shouldn't Go Further Than That

  • KitchenAid names more than one possible culprit in the same sentence, so buying whichever part is cheapest to find is a coin toss rather than a repair.
  • A microwave stores energy in its high-voltage capacitor, and that charge does not drain when the power goes off; opening the outer case is therefore dangerous even on a unit that has been disconnected for hours.
  • Every timing and cut-off decision in the appliance runs through this board, so a board reseated wrongly can leave the unit running when it should stop rather than simply refusing to work.

Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.

Technical Reference

Code
1c4c
Appliance
KitchenAid microwave
Checked
September 2026

Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Whirlpool Corporation.

Other Microwave Error Codes

Related Guides

Still Seeing 1c4c?

Book a trained technician and get it diagnosed correctly the first time — no guesswork, no repeat visits.

FAQ

1c4c FAQ

KitchenAid's text names the oven control or its wiring without saying which, so a code that only shows up during one specific function tells a technician far more than the code number alone.

The same sentence names the wiring loom as an equal possibility, so replacing the board first is a guess; checking the loom for a loose, chafed, or corroded connection is what actually narrows it down.

Need a repair? We're ready to help. Call Now
Call Us Schedule