Defrost drain freezing solid is a common issue on the KTRC19KKBL, and it sends meltwater under the crisper drawers rather than down the drain. Shelf and bin breakages are the other thing to expect on a cabinet this age, usually starting small before a full piece gives way.
KitchenAid KTRC22KMSS
Control board problems are common on the KTRC22KMSS after many years of service, showing up as a cabinet that stops answering its settings. A condenser fan that has seized or slowed is the other issue to check, usually showing up first as poor cooling in warm weather.
KitchenAid KTRC19KKSS
Door hinge and closer wear is common on the KTRC19KKSS, and it leaves the door sitting proud rather than swinging shut on its own. Sealed-system problems are the more serious possibility if the cabinet isn’t cooling well, and if one is found we say so plainly.
KitchenAid KTRC22KVSS
Temperature sensing drift is common on the KTRC22KVSS, leaving the cabinet unable to settle at a consistent temperature. Electronic control failure is the other issue to watch for, where the cabinet keeps cooling but the panel stops answering entirely.
KitchenAid KSSS42QHX00
Evaporator fan bearing wear is common on the KSSS42QHX00, and it eventually leaves the fan unable to start from cold. Water supply problems — the valve, the line, or the filter housing — are the other issue to check on a plumbed unit.
KitchenAid KTLA22ELSS
Defrost problems show up often enough on the KTLA22ELSS that a slowly warming cabinet is usually traced back to the heater, thermostat, or timer rather than the compressor. Cracked door bins and shelf trim are the other thing to expect, and are ordinary wear rather than a sign of anything more serious.
KitchenAid KSSS42QJW
Water inlet valve or supply line leaks are worth checking on a plumbed KSSS42QJW showing signs of an unexplained leak. Cracked door bins and shelf trim are the other thing to expect, ordinary wear on a cabinet of this age.
KitchenAid KTLA22EMSS
Worn hinge cams and a sagging door are common on the KTLA22EMSS, and the fix is mechanical rather than anything to do with the cooling system. Sealed-system problems are the more serious possibility if the cabinet won’t cool properly — a refrigerant leak or restriction is the one issue we weigh carefully against the value […]
KitchenAid KSSS42QKW
Broken crisper runners and door bin lugs are common on the KSSS42QKW, mostly cosmetic but worth sourcing while parts are still available. A defrost cycle that has stopped running is the more significant issue, letting ice build behind the freezer back panel until airflow chokes.
KitchenAid KTRA19ELBL
A control board that has aged out of service is the part most worth checking on a KTRA19ELBL that has stopped responding correctly to its settings. Handle, hinge, and door-closer wear are the more everyday issue, and though mostly cosmetic after years of daily use, a worn closer can still let warm air creep in.