Ice maker fill or harvest problems are worth checking on a KTRS22ELWH fitted with one that is producing less ice than usual. An interior lamp that has failed, or a door switch that no longer tells the control the door is closed, is the other common complaint.
KitchenAid KTRS19ELWH
A door gasket that has hardened with age is one of the more common issues on the KTRS19ELWH — once it loses its flexibility it no longer pulls the door tight, which shows up as extra frost or a compressor that runs longer than it should. Cracked shelves and bins are the other wear item […]
KitchenAid KTRS22EMBL
A drain tube silted up with debris is a common, inexpensive fix on the KTRS22EMBL if water is showing up unexpectedly. Defrost problems are the other issue to check if the cabinet is slowly warming, usually a failed heater, thermostat, or timer.
KitchenAid KTRS19KJWH
An ice maker on the KTRS19KJWH that fills but will not eject is a common complaint, and it can end with the bin frozen into a single block if it is not caught early. Defrost problems are the other thing to check if the cabinet is warming up — a failed heater, thermostat, or timer […]
KitchenAid KTRS22EMSS
Evaporator fan bearing wear is common on the KTRS22EMSS, and it can progress until the fan will not start from cold at all. Electronic control failure is the other issue to watch for, where the cabinet keeps running but the panel no longer has any effect.
KitchenAid KTRS19KKSS
A blocked drain at the back of the freezer floor is a routine, inexpensive fix on the KTRS19KKSS. A defrost cycle that has stopped completing is more involved — once it does, ice builds up behind the back panel until it eventually chokes off the airflow the cabinet needs.
KitchenAid KTRS22KG
Water inlet valve or supply line leaks are worth checking on a plumbed KTRS22KG showing signs of an unexplained leak. A control reading the cabinet wrongly is the other issue to watch for, causing the compressor to run far longer or far shorter than it should.
KitchenAid KTRS19KKWH
Restricted condenser airflow is the commonest reason a KTRS19KKWH this age slowly loses its grip on temperature — dust and pet hair around the coils are usually to blame. Evaporator fan motor noise is the other thing to listen for, since a fan that stops can let the fresh food side warm up even while […]
KitchenAid KTRS22MH
Broken crisper runners and door bin lugs are common on the KTRS22MH, mostly cosmetic but worth sourcing while parts are still available. Cold control or thermistor drift is the more functional issue, leaving the cabinet running warm overall or over-freezing the top shelf.
KitchenAid KTRS19KMSS
Cold control or thermistor drift is common on the KTRS19KMSS, and once it wanders out of calibration the cabinet can run warm overall while over-freezing the top shelf. Start relay failure is the other issue to check if the compressor won’t start at all despite being mechanically sound.