KitchenAid KBLC36FKS

Shelf and bin breakages are worth chasing down early on the KBLC36FKS before parts get harder to find. A hardened door gasket that no longer seals tightly is another common issue, letting warm air work its way in around the door, and temperature sensing that has drifted out of calibration can leave the cabinet unable […]

KitchenAid KBLS36MHW

Door hinge or closer wear that keeps the door from swinging fully shut is a common finding on the KBLS36MHW. A silted-up drain tube is another routine, low-cost issue worth checking at the same visit, and a defrost heater, thermostat, or timer that has stopped cycling can leave the evaporator packed with frost.

KitchenAid KBRC36MHW

Temperature sensing that has wandered out of calibration is a common issue on the KBRC36MHW, leaving it unable to settle at a steady temperature. On units plumbed for water, supply valve or line problems are another frequent finding, and a compressor that clicks every few minutes without ever starting usually points to the start relay […]

KitchenAid KBLC36FMS

A defrost heater, thermostat, or timer that has stopped cycling is a common issue on the KBLC36FMS, letting frost pack the evaporator until the cabinet slowly warms. An ice maker that fills but will not eject the cubes is another frequent complaint on this model.

KitchenAid KBRA20ELBL

Electronic control failure — where the KBRA20ELBL keeps running but stops answering the panel — is one of the issues we see on this model. Worn evaporator fan bearings are another common finding, eventually leaving a fan that will not start from cold, and condenser coils choked with dust and pet hair are a third […]

KitchenAid KBLC36FTS

Sagging doors with worn hinge cams are a common issue on the KBLC36FTS, keeping the door seal from meeting the cabinet squarely. A blocked drain at the back of the freezer floor is another frequent, low-cost fix worth checking at the same visit, and a defrost cycle that has stopped running can let ice build […]

KitchenAid KBRA20ELSS

A control that misreads the cabinet’s actual temperature is a common issue on the KBRA20ELSS, making the compressor run far longer or shorter than it needs to. Leaks from the water inlet valve or supply line are another frequent finding on units plumbed for water.

KitchenAid KBLC36MHW

A control board that has aged out of service is the part most worth checking first if the KBLC36MHW stops responding to its settings. Evaporator fan motor noise is another common finding on this model, and restricted airflow around the condenser from dust buildup is a third reason it can slowly lose its grip on […]

KitchenAid KBRA20ELWH

A door switch problem — including an interior lamp that stays lit even with the door shut — is a common, inexpensive issue on the KBRA20ELWH. A perished door gasket is another frequent finding, letting warm air in and keeping the compressor running longer than it should.

KitchenAid KBLO36FTX

Cold control or thermistor drift is a common issue on the KBLO36FTX, leaving the cabinet running either too warm or over-freezing the top shelf. A weeping inlet valve leaving a slow puddle behind the cabinet is another frequent, easy-to-miss finding, and start relay failure can stop an otherwise sound compressor dead.

Need a repair? We're ready to help. Call Now
Call Us Schedule