KitchenAid KBRS22KCMS

A failed interior lamp or a door switch that no longer registers the door as closed is a common, inexpensive fix on the KBRS22KCMS. A hardened door gasket that has lost its seal is another frequent finding worth checking at the same visit, and shelf or bin breakages are worth chasing down early before parts […]

KitchenAid KBSN608ESS

A condenser fan that has seized or slowed is a common finding on the KBSN608ESS, usually showing up first as weaker cooling in warm weather. Door hinge and closer wear is another frequent issue, leaving the door sitting proud instead of swinging shut on its own.

KitchenAid KBRS22KKWH

A defrost heater, thermostat, or timer that has stopped cycling is a common issue on the KBRS22KKWH. An ice maker that fills but will not eject the cubes is another frequent complaint on this model, and lighting or door-switch problems are worth ruling out at the same visit before assuming anything bigger.

KitchenAid KBSN748SJP

A compressor that clicks every few minutes without starting is a common issue on the KBSN748SJP, typically pointing to the start relay or overload protector rather than the compressor itself. Electronic control failure, where the unit keeps running but stops responding to the panel, is another issue we see on this model.

KitchenAid KBRO36FTX

Lighting or door-switch problems are worth ruling out first on the KBRO36FTX before assuming anything is wrong with the cooling side. Cracked bins or worn shelf trim are ordinary cosmetic wear on a cabinet this age, while a door seal gone stiff from years of use is a more functional concern that lets warm room […]

KitchenAid KBRS22KTSS

Condenser coils choked with dust and pet hair are a common finding on the KBRS22KTSS, making the compressor run longer and hotter than it was meant to. Sagging doors with worn hinge cams are another frequent issue, keeping the seal from meeting the cabinet squarely.

KitchenAid KBLC36FTS

Sagging doors with worn hinge cams are a common issue on the KBLC36FTS, keeping the door seal from meeting the cabinet squarely. A blocked drain at the back of the freezer floor is another frequent, low-cost fix worth checking at the same visit, and a defrost cycle that has stopped running can let ice build […]

KitchenAid KBRA20ELSS

A control that misreads the cabinet’s actual temperature is a common issue on the KBRA20ELSS, making the compressor run far longer or shorter than it needs to. Leaks from the water inlet valve or supply line are another frequent finding on units plumbed for water.

KitchenAid KBLC36MHW

A control board that has aged out of service is the part most worth checking first if the KBLC36MHW stops responding to its settings. Evaporator fan motor noise is another common finding on this model, and restricted airflow around the condenser from dust buildup is a third reason it can slowly lose its grip on […]

KitchenAid KBRA20ELWH

A door switch problem — including an interior lamp that stays lit even with the door shut — is a common, inexpensive issue on the KBRA20ELWH. A perished door gasket is another frequent finding, letting warm air in and keeping the compressor running longer than it should.

Need a repair? We're ready to help. Call Now
Call Us Schedule