KitchenAid KTRS19KKSS

A blocked drain at the back of the freezer floor is a routine, inexpensive fix on the KTRS19KKSS. A defrost cycle that has stopped completing is more involved — once it does, ice builds up behind the back panel until it eventually chokes off the airflow the cabinet needs.

KitchenAid KTRS22KG

Water inlet valve or supply line leaks are worth checking on a plumbed KTRS22KG showing signs of an unexplained leak. A control reading the cabinet wrongly is the other issue to watch for, causing the compressor to run far longer or far shorter than it should.

KitchenAid KTRS19KKWH

Restricted condenser airflow is the commonest reason a KTRS19KKWH this age slowly loses its grip on temperature — dust and pet hair around the coils are usually to blame. Evaporator fan motor noise is the other thing to listen for, since a fan that stops can let the fresh food side warm up even while […]

KitchenAid KTRS22MH

Broken crisper runners and door bin lugs are common on the KTRS22MH, mostly cosmetic but worth sourcing while parts are still available. Cold control or thermistor drift is the more functional issue, leaving the cabinet running warm overall or over-freezing the top shelf.

KitchenAid KTRS19KMSS

Cold control or thermistor drift is common on the KTRS19KMSS, and once it wanders out of calibration the cabinet can run warm overall while over-freezing the top shelf. Start relay failure is the other issue to check if the compressor won’t start at all despite being mechanically sound.

KitchenAid KTRS22MHBL

An interior lamp or door switch failure is a common complaint on the KTRS22MHBL, and either is usually a quick fix once identified. Defrost drain freezing solid is the other issue to check, sending meltwater under the crisper drawers instead of down the drain.

KitchenAid KTRS20MH

A door gasket that has hardened with age is a frequent issue on the KTRS20MH, and once it happens the door stops sealing fully even if it looks fine. Shelf and bin breakages are the other common wear item, usually starting small before a full piece gives way.

KitchenAid KTRS22MHBT

Door hinge and closer wear is common on the KTRS22MHBT, leaving the door sitting proud instead of swinging shut on its own. A condenser fan that has seized or slowed is the other issue to check, usually showing up first as poor cooling in warm weather.

KitchenAid KTRS20MHBL

An ice maker that fills but will not eject is common on the KTRS20MHBL, and it is worth fixing before the whole bin freezes solid. Defrost problems are the other frequent cause of trouble, usually a failed heater, thermostat, or timer that lets frost build up until the cabinet starts warming.

KitchenAid KTRS20MHBT

Sagging doors from worn hinge cams are common on the KTRS20MHBT, keeping the seal from meeting the cabinet squarely even with an otherwise good gasket. Condenser coils choked with dust are the other frequent issue, and cleaning them is often enough to bring the compressor’s runtime back to normal.

Need a repair? We're ready to help. Call Now
Call Us Schedule