KitchenAid KSRI25FNST

A blocked defrost drain is a common, inexpensive fix on the KSRI25FNST, leaving water under the crispers or running out onto the floor until it’s cleared. Loss of refrigerant charge is the far more serious possibility, and it is the finding that usually decides whether an older cabinet is worth repairing.

KitchenAid KSRP25FTSS

Control board problems are the main age-related failure on the KSRP25FTSS: after enough years in service the board can stop responding to its own settings, leaving the cabinet running as if no one had touched the dial. A failing evaporator fan is the other thing we listen for — it usually announces itself first as […]

KitchenAid KSRJ22CNSS

A failing evaporator fan is common on the KSRJ22CNSS, usually starting as a rising whine that turns into a rattle when the door is held shut. A condenser fan that has seized or slowed is the other thing to check, and it tends to show up first as poor cooling in warm weather.

KitchenAid KSRS22FGSS

A hardened door gasket is one of the more common issues on the KSRS22FGSS — once it stiffens with age it can no longer pull the door tight against the cabinet, letting warm air creep in. Temperature sensing that has drifted out of calibration is the other thing to check, since it leaves the cabinet […]

KitchenAid KSRJ22CNST

Water supply problems — the valve, the line, or the filter housing — are common on a plumbed KSRJ22CNST and can cut off the dispenser or ice maker. Compressor start relay and overload problems are the other thing to check, usually heard as a click every few minutes with no cooling following it.

KitchenAid KSRS22KG

An ice maker that fills but will not eject is a common complaint on the KSRS22KG, and left alone it usually ends with the bin frozen solid. Lighting and door-switch problems are worth ruling out too, since a stuck switch can affect more than just the light and is worth checking before assuming the cooling […]

KitchenAid KSRJ22IMST

Cracked door bins and shelf trim are ordinary wear on a KSRJ22IMST of this age, mostly cosmetic. A door seal gone stiff is the more functional issue, letting warm room air track in along one edge even when the rest of the seal looks fine.

KitchenAid KSRS22KGBT

A blocked drain at the back of the freezer floor is a common, inexpensive fix on the KSRS22KGBT — clearing it is routine and does not touch the sealed system. Sealed-system problems themselves are the other possibility, and because a refrigerant leak or restriction is the one issue worth weighing against the value of the […]

KitchenAid KSRJ25CN

A defrost cycle that has stopped running is a common issue on the KSRJ25CN, letting ice build up behind the freezer back panel until the airflow the cabinet depends on chokes off. Ice production tailing off is the other thing to check, usually the fill valve, a frozen fill tube, or the module itself.

KitchenAid KSRS22KGWH

Restricted condenser airflow is the most common reason an older KSRS22KGWH slowly loses its grip on temperature, usually from dust and pet hair choking the coils. Worn handles, hinges, and door closers are the other thing to expect after years of daily use, though they are cosmetic rather than something that affects cooling.

Need a repair? We're ready to help. Call Now
Call Us Schedule