Cracked door bins and shelf trim are ordinary wear on a KSRJ22IMST of this age, mostly cosmetic. A door seal gone stiff is the more functional issue, letting warm room air track in along one edge even when the rest of the seal looks fine.
KitchenAid KSRS22KGBT
A blocked drain at the back of the freezer floor is a common, inexpensive fix on the KSRS22KGBT — clearing it is routine and does not touch the sealed system. Sealed-system problems themselves are the other possibility, and because a refrigerant leak or restriction is the one issue worth weighing against the value of the […]
KitchenAid KSRJ25CN
A defrost cycle that has stopped running is a common issue on the KSRJ25CN, letting ice build up behind the freezer back panel until the airflow the cabinet depends on chokes off. Ice production tailing off is the other thing to check, usually the fill valve, a frozen fill tube, or the module itself.
KitchenAid KSRS22KGWH
Restricted condenser airflow is the most common reason an older KSRS22KGWH slowly loses its grip on temperature, usually from dust and pet hair choking the coils. Worn handles, hinges, and door closers are the other thing to expect after years of daily use, though they are cosmetic rather than something that affects cooling.
KitchenAid KSRJ25CNSS
Handle, hinge, and door-closer wear from years of daily use is common on the KSRJ25CNSS and mostly a cosmetic annoyance. A blocked defrost drain is the more functional issue, leaving water under the crispers or running out onto the floor until it’s cleared.
KitchenAid KSRS22MWMS
A weeping inlet valve is worth checking on a KSRS22MWMS that has water pooling behind the cabinet, since the leak is often slow enough to be mistaken for condensation. Start relay failure is the other common issue, and it can stop an otherwise sound compressor from starting at all.
KitchenAid KSRG25FKBL
Defrost drain freezing solid is a common issue on the KSRG25FKBL, sending meltwater under the crisper drawers instead of down the drain where it belongs. Ice maker fill or harvest problems are the other thing to check where one is fitted, usually showing up as slow or uneven ice production.
KitchenAid KSRJ25CNST
Control board problems are common on the KSRJ25CNST after many years of service, showing up as a cabinet that no longer follows its own settings. A failing evaporator fan is the other thing to listen for, usually starting as a whine and turning into a rattle when the door is held shut.
KitchenAid KSRS25CKSS
Shelf and bin breakages are common on the KSRS25CKSS, typically starting as a hairline crack before a piece finally lets go. A hardened door gasket is the other frequent issue — once it stiffens with age it stops pulling the door tight, which can make the cabinet run more than it should.
KitchenAid KSRG25FKSS
Door hinge and closer wear is common on the KSRG25FKSS, leaving the door sitting proud so it no longer swings shut on its own. A drain tube silted up with debris is the other frequent issue, and clearing it is usually a simple, inexpensive job.