KitchenAid KSSC36FKS

Control board problems are common on the KSSC36FKS after many years of service, showing up as a cabinet that no longer follows its settings. A failing evaporator fan is the other thing to listen for, usually starting as a whine and developing into a rattle.

KitchenAid KSRS27CNBL

Door hinge and closer wear is common on the KSRS27CNBL, and it leaves the door sitting proud rather than swinging fully shut on its own. A drain tube silted up with debris is the other frequent issue, and clearing it is usually a simple job.

KitchenAid KSSC36MFS

Temperature sensing drift is common on the KSSC36MFS, and once it wanders out of calibration the cabinet never quite settles. Water supply problems are the other issue to check on a plumbed unit, whether at the valve, the line, or the filter housing.

KitchenAid KSRS27CNSS

Electronic control failure is a notable issue on the KSRS27CNSS — the cabinet keeps running, but the panel stops responding to any input. Evaporator fan bearing wear is the other thing to check, since it can progress until the fan will not start from cold.

KitchenAid KSSC36QKS

Lighting and door-switch problems are worth ruling out on the KSSC36QKS before anything is assumed about the cooling side. Cracked door bins and shelf trim are the other issue to expect, ordinary wear for a cabinet this age.

KitchenAid KSRS27FGSS

A control reading the cabinet wrongly is a common cause of erratic compressor behavior on the KSRS27FGSS, running it far longer or far shorter than the situation calls for. Water inlet valve or supply line leaks are the other thing to check on a plumbed unit.

KitchenAid KSRS25CNSS

Evaporator fan motor noise is common on the KSRS25CNSS, and once the fan stops the fresh food side can warm up while the freezer stays cold. Restricted condenser airflow is the other frequent cause of a cabinet that slowly loses its grip on temperature, usually solved with a coil cleaning.

KitchenAid KSRS27IKSS

Door switch and interior lighting problems are common on the KSRS27IKSS, occasionally leaving a lamp lit even with the door fully shut. Broken crisper runners and door bin lugs are the other issue to expect, mostly cosmetic but worth sourcing while parts are still around.

KitchenAid KSRS25CSMS

A weeping inlet valve is worth checking on the KSRS25CSMS if water is collecting behind the cabinet, since the leak is often slow enough to be mistaken for condensation. Start relay failure is the other common issue, and it can stop an otherwise sound compressor from starting at all.

KitchenAid KSRS27IKWH

Loss of refrigerant charge is the issue that most affects whether a KSRS27IKWH is worth repairing, since the cost depends heavily on where the leak is. Defrost drain freezing solid is a separate, cheaper problem, sending meltwater under the crisper drawers instead of down the drain.

Need a repair? We're ready to help. Call Now
Call Us Schedule