KitchenAid KTRA19ELSS

A weeping inlet valve is worth ruling out on a KTRA19ELSS with water behind the cabinet, since the leak can be slow enough to go unnoticed for weeks. Control board problems are the other common issue on a cabinet this age, usually showing up as settings the cabinet simply stops following.

KitchenAid KSSS48FKW

Door hinge and closer wear is common on the KSSS48FKW, leaving the door sitting proud instead of swinging shut on its own. Control board problems are the other issue to expect after many years of service, showing up as a cabinet that ignores its own settings.

KitchenAid KTRA19ELWH

An interior lamp or door switch failure is common on the KTRA19ELWH, and either can leave the light on with the door shut. A door gasket that has hardened with age is the other frequent issue, and once it stiffens it stops sealing the door fully against the cabinet.

KitchenAid KSSS48FM

Electronic control failure is a notable issue on the KSSS48FM — the cabinet keeps running, but the panel stops responding entirely. Temperature sensing drift is the other, more common issue, leaving the cabinet unable to settle on a steady reading.

KitchenAid KTRA19EMBL

Sealed-system problems on the KTRA19EMBL are identified plainly if that turns out to be the cause, rather than worked around with a partial fix. An ice maker that fills but does not eject is a separate and much more common issue, and it is worth fixing before the bin freezes into one block.

KitchenAid KSSP48QFB

Cracked door bins and shelf trim are ordinary wear on a KSSP48QFB of this age and mostly cosmetic. Defrost problems are the more important thing to watch for — a failed heater, thermostat, or timer can leave frost building on the evaporator until the cabinet starts warming up.

KitchenAid KSSS42MD

Sagging doors from worn hinge cams are common on the KSSS42MD, keeping the seal from meeting the cabinet squarely even with a good gasket. Electronic control failure is the other, more serious issue — the machine keeps running, but the panel no longer answers.

KitchenAid KSSP48QFS

A defrost cycle that has stopped running is a frequent cause of trouble on the KSSP48QFS — once it stops, ice builds up behind the freezer back panel until the airflow the fresh food side depends on is choked off completely. Sagging doors from worn hinge cams are the other thing to check, since they […]

KitchenAid KSSS42MDX03

A control board that has aged out of service is the part most worth checking on a KSSS42MDX03 that no longer follows its settings correctly. A control reading the cabinet wrongly is a related but separate issue, causing the compressor to run far longer or far shorter than it should.

KitchenAid KSSP48QFW

Evaporator fan motor noise is common on the KSSP48QFW, and once the fan stops altogether the fresh food side can climb in temperature while the freezer stays cold. Restricted condenser airflow is the other frequent cause of a cabinet that slowly loses its grip on temperature, usually from coils that have not been cleaned in […]

Need a repair? We're ready to help. Call Now
Call Us Schedule