On a KECC664BBL with an induction surface, a zone that will not recognize a pan is usually the cookware rather than the cooktop, since the sensors are built to detect flat-bottomed, magnetic pans specifically. A zone that goes fully dead while the others keep working is a different matter, checked at that zone’s own switch […]
KitchenAid KECD865H
A burner cap sitting out of position — which throws off the flame pattern and heat delivered — is a known issue on the KECD865H, alongside scorching underneath a zone from a burnt element receptacle.
KitchenAid KECC664BSS
A burner cap sitting slightly out of position is a common, quick fix for an uneven or lifting flame on the KECC664BSS, and reseating it correctly is usually enough on its own. Scorching underneath a zone points to something else — a burnt element receptacle — and is worth catching before it spreads.
KitchenAid KECD865HBT
The KECD865HBT has two issues on record: a thermal limiter that cuts a zone early because the glass above it is running hot, and — on builds with an induction surface — a zone that will not recognize a pan.
KitchenAid KECC667BBL
If a zone on the KECC667BBL cuts out sooner than expected, the thermal limiter reacting to heat building up under the glass is the likely cause rather than the element failing. Where this model has an induction zone, a pan the sensors will not recognize is usually the cookware rather than the cooktop.
KitchenAid KECD865HWH
Blocked burner ports giving an uneven or yellow flame, and a burner cap that has shifted out of position, are the two issues most often reported on the KECD865HWH.
KitchenAid KECC667BSS
A yellow, uneven, or lifting flame on the KECC667BSS is most often blocked burner ports, cleared by drying and cleaning them rather than replacing a part. A burner cap sitting out of position can produce a similar-looking flame and is checked at the same time.
KitchenAid KECD866R
Worn control knobs and shafts on the KECD866R can leave the setting out of step with the panel mark, and a thermal limiter cutting a zone early is the other issue documented for it.
KitchenAid KECD805E
The KECD805E is a ceramic-glass electric cooktop with a built-in downdraft vent system, and a cracked or chipped surface on one keeps it out of service until repaired, since the glass is what separates the elements and the vent opening from anything spilled above. Touch controls that respond only intermittently point instead to the panel […]
KitchenAid KECD866RSS
Continuous ignition clicking, usually from moisture or debris at the igniter, and blocked burner ports giving an uneven flame, are the two issues on file for the KECD866RSS.