A burner cap out of position, changing the flame pattern, is documented on the KGCP463KSS, alongside scorching under a zone from a burnt receptacle.
KitchenAid KGCC505HWH
A burner cap sitting out of position, which throws off the flame pattern, is documented on the KGCC505HWH, along with scorching underneath a zone from a burnt receptacle.
KitchenAid KGCP467JSS
A thermal limiter cutting a zone early — because the glass above it is running hot — is reported on the KGCP467JSS, and on induction-equipped builds, a zone that will not recognize a pan is the other issue.
KitchenAid KGCC506R
A thermal limiter cutting a zone early because the glass above it runs hot is one issue reported for the KGCC506R, and a zone that will not recognize a pan on induction-equipped builds is the other.
KitchenAid KGCP467JTL
Blocked burner ports causing an uneven flame are documented on the KGCP467JTL, and a burner cap sitting out of position is the other issue on file.
KitchenAid KGCC506RBL
Blocked burner ports giving a yellow or uneven flame are documented on the KGCC506RBL, and a burner cap out of position is the other issue on file.
KitchenAid KGCP482KSS
Worn control knobs and shafts, leaving the setting out of step with the panel, are documented on the KGCP482KSS, and a thermal limiter that cuts a zone early is the other issue reported.
KitchenAid KGCC506RWW
Control knobs and shafts worn to the point the setting no longer matches the panel are reported on the KGCC506RWW, alongside a thermal limiter that cuts a zone early.
KitchenAid KGCP483KSS
Continuous ignition clicking after a burner has lit is one issue on record for the KGCP483KSS, and blocked burner ports giving a yellow or uneven flame is the other.
KitchenAid KGCC566H
Ignition clicking that will not stop once a burner has lit is one issue on record for the KGCC566H, and blocked burner ports giving an uneven flame is the other.