Medium - Inspection Needed

KitchenAid Built-In Microwave Press Cancel to Reset Message

Built-In Microwave, including the microwave-oven combination: KitchenAid publishes this message on its own page and gives it the same text as its Call Service message - "This message will be displayed when a problem or error has been detected," followed…

What Press Cancel to Reset Means

Built-In Microwave, including the microwave-oven combination: KitchenAid publishes this message on its own page and gives it the same text as its Call Service message - "This message will be displayed when a problem or error has been detected," followed by "If Call Service is displayed after pressing Cancel, reset power to the product." Read together the two messages describe one sequence: the appliance asks you to press Cancel, and what it shows afterwards tells you whether the problem was momentary or not.

Common Causes of Press Cancel to Reset

  • A problem detected during or before a cycle that the control wants acknowledged
  • A transient condition that clears the moment the control is allowed to reset
  • An underlying failure that will announce itself again after Cancel

🔧 One Safe Check You Can Try

Press Cancel. That is what the message is asking for, and on a problem that was a passing state it is the whole fix. If the display then asks for service, let the appliance cool, interrupt power at the breaker for a minute, restore it, start a bake cycle, and watch for a minute.

⚠ Why You Shouldn't Go Further Than That

  • Pressing Cancel repeatedly on a message that keeps coming back trains you to ignore it, and the problem behind it is still there each time.
  • A microwave stores energy in its high-voltage capacitor, and that charge does not drain when the power goes off; opening the outer case is therefore dangerous even on a unit that has been disconnected for hours.
  • There is nothing published beyond Cancel and a power interruption, so anything further is diagnosis with equipment rather than steps anyone can follow at home.

Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.

Technical Reference

Code
Press Cancel to Reset
Appliance
KitchenAid microwave
Checked
September 2026

Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Whirlpool Corporation.

Other Microwave Error Codes

Related Guides

Still Seeing Press Cancel to Reset?

Book a trained technician and get it diagnosed correctly the first time — no guesswork, no repeat visits.

FAQ

Press Cancel to Reset FAQ

KitchenAid publishes the same explanation for both and keeps them on separate pages; together they describe one sequence, with Cancel first and a power interruption after.

A panel that does not respond at all is a different problem from a problem being reported, and it points toward the interface rather than toward whatever triggered the message.

Need a repair? We're ready to help. Call Now
Call Us Schedule