Medium - Inspection Needed

KitchenAid Dishwasher 9 Pause 1 Pause Blinking Light Sequence (F9E1)

Dishwasher: on a model without a digital readout, KitchenAid reports problems by blinking a light, and it publishes the sequences as pages in their own right. This one - nine flashes, a pause, then one flash, then the whole thing…

What 9 Pause 1 Pause - pause, repeat Means

Dishwasher: on a model without a digital readout, KitchenAid reports problems by blinking a light, and it publishes the sequences as pages in their own right. This one - nine flashes, a pause, then one flash, then the whole thing repeats - is the blink form of F9E1, and KitchenAid gives it the potential cause "Long Drain". The tub was supposed to be empty by the end of the drain window and still had water in it, which is usually something outside the machine rather than inside it. KitchenAid publishes the way to read these: count the first set of rapid flashes for the Function number, watch for a short pause of about one to two seconds, count the second set for the Error number, then wait through a longer pause of about five seconds before the whole sequence repeats.

Common Causes of 9 Pause 1 Pause - pause, repeat

  • The condition KitchenAid publishes for F9E1, which is long drain
  • A problem the control caught during its own checks rather than one you could see
  • A miscounted sequence, which is worth ruling out by watching several repeats before acting

🔧 One Safe Check You Can Try

Before you count anything, stand where you can see the light clearly and watch two or three full repeats, because a miscount by one flash sends you to a completely different problem. Once you are sure of the sequence, treat it exactly as you would the displayed code: the published response for F9E1 is the standard thirty-second power interruption. If the dishwasher is on a cord, unplug it for thirty seconds and plug it back in; if it is hard-wired, switch the breaker that feeds it off at the household panel, leave it off for thirty seconds, then switch it back on. Then watch whether the same pattern comes back.

⚠ Why You Shouldn't Go Further Than That

  • After the filter, the hose, the disposer and the air gap have been checked, the drain pump and the sump are what is left, and those are behind seals that have to be remade watertight.
  • A blink sequence read wrongly sends a technician after the wrong system, so the count matters more here than on a machine that prints the code out.
  • Everything this code refers to is behind the door panel or under the tub, and neither is opened while the machine is connected to power and water.

Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.

Technical Reference

Code
9 Pause 1 Pause - pause, repeat
Appliance
KitchenAid dishwasher
Checked
September 2026

Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Whirlpool Corporation.

Other Dishwasher Error Codes

Related Guides

Still Seeing 9 Pause 1 Pause - pause, repeat?

Book a trained technician and get it diagnosed correctly the first time — no guesswork, no repeat visits.

FAQ

9 Pause 1 Pause - pause, repeat FAQ

Probably nothing wrong with the pump yet - a long drain is usually something outside the machine, like the filter, the hose, the disposer connection, or the air gap holding water back.

The drain pump and the sump, and those sit behind seals that have to be remade watertight once opened, which is why that step goes to a technician rather than staying a DIY job.

Need a repair? We're ready to help. Call Now
Call Us Schedule