KitchenAid Microwave

KitchenAid KMCS1016GBS

Model # KMCS1016GBS

The KMCS1016GBS is a KitchenAid microwave oven. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. KitchenAid’s US product site shows it in February 2018, and no later capture carries it.

A KMCS1016GBS is comparatively recent, so faults on it are more often a single failed component than general wear. The KMCS1016GBS is discontinued, so the parts question gets answered first and the price second.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in February 2018
  • A KitchenAid owner's manual for this model is on record
  • KitchenAid published installation instructions for it

Most Common Issues on This Model

01

Keypad legends worn away with use, so the panel is hard to read

02

A door seal face damaged, which the oven can read as an interlock fault

03

A magnetron reaching the end of its life, showing as heating that has become slow and uneven

04

A door interlock switch that has failed, so the oven lights and runs its fan but will not heat

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KMCS1016GBS FAQ

The KMCS1016GBS label sits inside the door, in KitchenAid's own words. It is the adhesive label used across their major appliances and it carries both numbers. A photograph of the KMCS1016GBS label is the most reliable thing you can send us.

Not usually in labour. What age changes on a KMCS1016GBS is the chance that a given part has to come from a specialist supplier rather than off the shelf, and that is established at the outset so the price you are given is the price of the actual job.

Yes, and it is one of the simpler repairs. With the KMCS1016GBS unplugged at the wall, the drive coupler under the glass tray is the first thing checked, since it can be inspected from inside the cavity. If the coupler on a KMCS1016GBS is sound, the motor beneath it is the fault and is replaced by a technician.

Need a repair? We're ready to help. Call Now
Call Us Schedule