KitchenAid Microwave

KitchenAid KMBP100EBS

Model # KMBP100EBS

The KMBP100EBS is one of the KitchenAid microwave ovens. No published specification for this model was recovered — no dimension, no capacity, no feature list — so none is stated here, and no figure has been taken from a neighbouring model number. It was on KitchenAid’s US product site from March 2016 to September 2017 and gone after that.

That puts a KMBP100EBS roughly ten to fifteen years into service, the point at which the door latch, the interlock switches and the turntable drive tend to need attention. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from March 2016 to September 2017
  • A KitchenAid owner's manual for this model is on record
  • KitchenAid published installation instructions for it

Most Common Issues on This Model

01

A door interlock switch that has failed, so the oven lights and runs its fan but will not heat

02

Touch panel and membrane failure, where a key is ignored or repeats on its own

03

A turntable motor or drive coupler that has stopped turning

04

Interior lamp and lamp holder failures

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KMBP100EBS FAQ

KitchenAid gives the location for its microwave ovens as inside the door, and that is where the KMBP100EBS plate sits. It is an adhesive label, typically silver on major appliances, carrying the model number and the serial number together. Read the whole KMBP100EBS string off the label rather than from memory, because it sits in a family of very similar numbers.

Production of the KMBP100EBS ended some time ago. That does not rule out a repair - the wear items are largely shared across a generation - but it does mean the parts question on a KMBP100EBS is settled before any figure is put on the work.

On some builds the cavity lamp is reachable from inside, but on many it sits behind the casing. With the KMBP100EBS unplugged at the wall, only a lamp accessible from within the cavity should be attempted. Where the lamp in a KMBP100EBS is behind the casing, it is left to a technician for the same high-voltage reason as everything else in there.

Need a repair? We're ready to help. Call Now
Call Us Schedule