KitchenAid Microwave

KitchenAid KHMS155LBL

Model # KHMS155LBL

The KHMS155LBL belongs to KitchenAid’s US microwave oven catalogue. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here. It was on KitchenAid’s US product site from November 2003 to December 2005 and gone after that.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KHMS155LBL3. A plate reading one of those is still a KHMS155LBL; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A microwave oven of that vintage is two decades or more into service, and the door latch, the interlock switches and the turntable drive are long past as-new. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KHMS155LBL is established before any figure is put on the job.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from November 2003 to December 2005
  • Rating-plate revision codes observed for this model: KHMS155LBL3
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Grease and charcoal filters left unchanged, which shows as poor extraction and a labouring fan

02

High-voltage component failure, which is bench work for a technician rather than anything an owner can inspect

03

Control board faults after years of heat and grease

04

A cooling fan path blocked with grease, so the oven overheats and stops part way through a programme

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KHMS155LBL FAQ

For a KHMS155LBL, look inside the door. That is the location KitchenAid publishes for its microwave ovens, and the label there is the authoritative source for the number - front-panel badging and box labels often differ from what is actually on the KHMS155LBL.

Sometimes, yes - a discontinued model like the KHMS155LBL can mean waiting on a specialist supplier for an obsolete part. We establish that on a KHMS155LBL before the job starts, so the choice between waiting, substituting where a substitute genuinely exists, and replacing the machine is yours to make with the facts in front of you.

Most often a damaged waveguide cover or metal in the cavity. With the KHMS155LBL unplugged at the wall, the cavity can be inspected and anything metallic removed. If a KHMS155LBL still arcs with an empty, clean cavity, it needs a technician and should not be run in the meantime.

Need a repair? We're ready to help. Call Now
Call Us Schedule