KitchenAid Microwave

KitchenAid KEMC308KSS

Model # KEMC308KSS

KEMC308KSS is one of the microwave oven model numbers KitchenAid carried in the United States. No published specification for this model was recovered, and none is invented here to fill the space. It was on KitchenAid’s US product site from November 2001 to December 2005 and gone after that.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KEMC308KSS0, KEMC308KSS01, KEMC308KSS04. A plate reading one of those is still a KEMC308KSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A microwave oven of that vintage is two decades or more into service, and the door latch, the interlock switches and the turntable drive are long past as-new. The KEMC308KSS is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from November 2001 to December 2005
  • Rating-plate revision codes observed for this model: KEMC308KSS0, KEMC308KSS01, KEMC308KSS04
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Control board faults after years of heat and grease

02

A cooling fan path blocked with grease, so the oven overheats and stops part way through a programme

03

Waveguide cover degradation inside the cavity, visible as scorching at one spot

04

Cavity paint worn through where dishes rub, which leads to rust at that spot

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KEMC308KSS FAQ

For a KEMC308KSS, look inside the door. That is the location KitchenAid publishes for its microwave ovens, and the label there is the authoritative source for the number - front-panel badging and box labels often differ from what is actually on the KEMC308KSS.

Sometimes, yes - a discontinued model like the KEMC308KSS can mean waiting on a specialist supplier for an obsolete part. We establish that on a KEMC308KSS before the job starts, so the choice between waiting, substituting where a substitute genuinely exists, and replacing the machine is yours to make with the facts in front of you.

Most often a damaged waveguide cover or metal in the cavity. With the KEMC308KSS unplugged at the wall, the cavity can be inspected and anything metallic removed. If a KEMC308KSS still arcs with an empty, clean cavity, it needs a technician and should not be run in the meantime.

Need a repair? We're ready to help. Call Now
Call Us Schedule