KitchenAid Cooktop

KitchenAid KECC507KSS

Model # KECC507KSS

The KECC507KSS is a KitchenAid cooktop. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here. It was on KitchenAid’s US product site from November 2001 to August 2004 and gone after that.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KECC507KSS0, KECC507KSS02, KECC507KSS03. A plate reading one of those is still a KECC507KSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A cooktop of that vintage is two decades or more into service, and the switches, the element or burner connections and the control knobs are long past as-new. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KECC507KSS is established before any figure is put on the job.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from November 2001 to August 2004
  • Rating-plate revision codes observed for this model: KECC507KSS0, KECC507KSS02, KECC507KSS03
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

An infinite switch failed closed, so the zone runs at full heat regardless of where the knob is set

02

Cracked or chipped ceramic glass, which takes the cooktop out of service until the glass is dealt with

03

Touch controls that respond intermittently or not at all, where a touch panel is fitted

04

Continuous ignition clicking on a gas configuration, usually moisture or debris at the igniter

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KECC507KSS FAQ

For a KECC507KSS, look on the cooktop's liner, beneath the burners. That is the location KitchenAid publishes for its cooktops, and the label there is the authoritative source for the number - front-panel badging and box labels often differ from what is actually on the KECC507KSS.

Sometimes, yes - a discontinued model like the KECC507KSS can mean waiting on a specialist supplier for an obsolete part. We establish that on a KECC507KSS before the job starts, so the choice between waiting, substituting where a substitute genuinely exists, and replacing the machine is yours to make with the facts in front of you.

That is a low-setting fault on the gas valve rather than anything you can adjust from the knob. With the cooktop switched off at its supply and the gas isolated, the valve on a KECC507KSS is inspected and its low-flame setting checked, which is a bench adjustment on a KECC507KSS rather than an owner one.

Need a repair? We're ready to help. Call Now
Call Us Schedule