KitchenAid Oven

KitchenAid KOCE507EBS

Model # KOCE507EBS

The KOCE507EBS is one of the KitchenAid wall ovens. No published specification for this model was recovered, and none is invented here to fill the space. It was on KitchenAid’s US product site from March 2017 to September 2017 and gone after that.

The KOCE507EBS is recent enough that age alone is rarely the explanation, and a specific component is usually at fault. The KOCE507EBS is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from March 2017 to September 2017
  • A KitchenAid owner's manual for this model is on record
  • KitchenAid published installation instructions for it

Most Common Issues on This Model

01

A latch mechanism seized by grease and heat over many years

02

On a double cavity, one oven working normally while the other will not come up to temperature

03

A failed bake or broil element, often visible as a break or a blistered section on the element itself

04

Oven temperature sensor drift, so the cavity runs hot or cold against the temperature set

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KOCE507EBS FAQ

KitchenAid gives the location for its wall ovens as inside the door, and that is where the KOCE507EBS plate sits. It is an adhesive label, typically silver on major appliances, carrying the model number and the serial number together. Read the whole KOCE507EBS string off the label rather than from memory, because it sits in a family of very similar numbers.

Production of the KOCE507EBS ended some time ago. That does not rule out a repair - the wear items are largely shared across a generation - but it does mean the parts question on a KOCE507EBS is settled before any figure is put on the work.

With the oven switched off at its supply, the oven temperature sensor on a KOCE507EBS is the part tested first, because a sensor that has drifted reports the wrong cavity temperature and the control heats to it faithfully. Element and control faults on a KOCE507EBS are considered after the sensor has been proved.

Need a repair? We're ready to help. Call Now
Call Us Schedule