KitchenAid Dishwasher

KitchenAid KUDS01FL

Model # KUDS01FL

The KUDS01FL is one of the KitchenAid dishwashers. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. The only dated record of it is a capture of KitchenAid’s US product site from August 2005.

That puts the KUDS01FL two decades or more into use, which is where the door seal, the pump and the spray system start to decide how the machine behaves. The KUDS01FL is discontinued, so the parts question gets answered first and the price second.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in August 2005
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Drain hose and clip wear at the connection, which leaks only while the pump is running

02

Scale build-up on the heater and in the spray system where the water is hard

03

A diverter or wash-arm feed fault that leaves one rack washing and the other not

04

A drain pump that hums but moves no water, leaving standing water in the sump at the end of a cycle

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KUDS01FL FAQ

No - front badging is a series name, not a model number. The KUDS01FL number comes off the plate on the left edge of the dishwasher's door, and that is the string to work from. Two machines wearing the same front badge can differ in parts, so the KUDS01FL plate is what settles it.

Often yes, and where they cannot we say so at the point we find out, so you are not billed for work that cannot be completed. That check comes first on a discontinued model like the KUDS01FL, not last.

Not as routine, but a seal that has gone hard is worth replacing before it leaks. With the dishwasher switched off at its supply, the seal face on a KUDS01FL can be inspected by hand: if it no longer springs back when pressed, it is at the end of its life on a KUDS01FL and is a small job to change.

Need a repair? We're ready to help. Call Now
Call Us Schedule