KUDK03CTSS is one of the dishwasher model numbers KitchenAid carried in the United States. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. A single dated capture, May 2012, places it on KitchenAid’s US product site, and nothing after that does.
KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KUDK03CTSS0, KUDK03CTSS1, KUDK03CTSS2, KUDK03CTSS3. A plate reading one of those is still a KUDK03CTSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A machine of that age has had enough cycles for the door seal, the pump and the spray system to have moved on from new, and that is where diagnosis usually starts on a KUDK03CTSS. Being out of production, a KUDK03CTSS has its parts position checked at the outset rather than after a diagnosis.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site in May 2012
- Rating-plate revision codes observed for this model: KUDK03CTSS0, KUDK03CTSS1, KUDK03CTSS2, KUDK03CTSS3
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
A diverter or wash-arm feed fault that leaves one rack washing and the other not
A drain pump that hums but moves no water, leaving standing water in the sump at the end of a cycle
Wash motor bearing wear, heard as a rising whine or grinding through the cycle
A door latch or latch switch that no longer tells the control the door is shut, so the cycle will not start